inoxidable I

This was a quickee stainless project a while back.

Sometimes cardboard templates are perfect.

Sometimes they're not!

I had to make this symmetrical 

before cutting it all out.

Another clamp party...

I rarely get to see these things installed!

TP

not ski nautique

Man I've been lagging with the posts lately...

Fortunately it's been busy,

and now the kids are out of school.

I thought it was busy before!

Here's a recent project.

A friend Rich got this boat for the sole purpose

of heading out to Ralph's for surf sessions.

(A kinda remote spot off Point Loma)

The boards were getting battered 

in the relatively small space.

He waited patiently for weeks

while I got my chit together...

His first idea was palapa style,

with vertical tubes set up in a big square.

He had tubes bent at a local shop,

who crimped them like hacks.

He would've been happy with a cube structure,

just to save his boards.

No way could I ghetto the old Chris Craft,

even if 90 degree fish-mouth joints 

are easier to make.

This was knocked out in one big day.

The angled bars still make a massive rack.

Now it looks like an old Ski Nautique.

Way cooler.

It's been a real surf machine,

guess he's gotten 4 boards up there!

I need to get a loaded pic...

TP

Multi Multimeters

The other day I got myself into a pickle.

A project needed a solid multimeter

that could measure ohms/resistance,

and I realized mine were all glitchy.

So now you're gonna hear all about them...

Yes a fun yawner!

My go to tester for the past 8 years is this

beater Blue-Point MT145.

It's never worked perfectly,

sometimes doesn't even want to turn on.

The culprit is obvious,

severely corroded battery contacts.

That blue stuff grows overnight,

every time I gotta twist the batteries or scrape it.

The big problem is it's basically a voltmeter,

doesn't read resistance for chit.

Sometimes it'll work,

sometimes there's this ear piercing beep.

It just sucks.

I'm not a Snap-On guy anyway,

and I like the analog needle swing.

My previous machine was this old tank.

A Knight Auto Analyzer,

nice and heavy so it doesn't slide around.

I loved it for shop use,

other than the knob being broken.

That little thing sucks to twist,

and I never turned it off.

Doh...

This thing uses 4 D batteries.

Who uses D batteries any more?

Have you priced good D batteries lately?

They lasted for years, 

maybe a decade.

Even at $1.50/yr it's not a bad deal,

but I'll wait for a cheap swap meet deal...

The problem is this only reads high ohms,

so it's limited for basic use,

although there are many engine features.

This hefty unit was a garage sale score,

a 1980's boxed Simpson 260 series 7.

The 260 model has been made since the 1930's!

Many believe it's the best US analog meter made.

The inventor built the compass for Lindbergh's Spirit of St. Louis!

I've had this for a couple years now,

and admit to never using it.

One reason is it's in such good condition,

I'd probably drop it.

That was just an excuse,

the real reason is these friggin batteries.

A big D and an old school 9-volt,

yeah the one you used to lick as a kid.

Dang these are expensive now!

Mainly because they come in 2-packs.

I bit the bullet and this works so smooth.

eBay helped with the broken leather case.

I'll need to zip tie it or something,

but that's the armor it deserves.

This story has evolved over many years,

nothing was a surprise,

there was a new object to hunt for.

Sure there are dozens of new cheesy $20 units

but where's the fun in that.

Before buying those batteries,

I found this $7 TMK TW-20S,

that looked like an old solid meter.

Nope.

TMK makes a version similar to the 260,

but there's no info on this TW model.

Time to crack it open.

This seemed to have heavy duty guts.

Aha!

What's this burn mark...

A 10k ohm resistor?

This is the project that inspired this installment.

WTF is going on here at the dinner table!?

See how multimeters are helping other multimeters?

The $2 resistor was swapped and it works like a charm.

But wait there's more!

While the resistor was being shipped from China,

I found this Radio Shack unit.

I'd asked earlier and he wanted $4,

then price checked eBay.

A Micronta 22-202u goes for $20-30!

Someone had spilled coffee on it 

before I returned.

$1.87 was the change I had in my pocket.

Score!

I made some red:black leads and it worked great!

Fits into the toolbox no problem.

Now there are enough multimeters for the house,

shop, a mobile one, and a loaner!

Holey Chit...

TP

Cart Wars

So I'm walking up this boat dock,

and what do I see...

Another custom aluminum dock cart.

WTF...

I was surprised at the similarities.

There were a few differences I liked-

The reinforcement of the handle base,

the more level stance pad.

Then I remembered this guy...

he was checking out the cart 

at the BIG3 swap meet in 2012,

back when my cart was new.

He had this crazy mini boat cart...

And it made me wonder...

Hmmm...

Anyway after 4+ years this cart

is still one of the most useful gadgets I've built...

TP

Slippin

Nothing's worse than having a car,

especially if it's a hot rod,

that can't be driven.

After a 6 month slumber,

the old 40 could barely get out of its way.

The 302 lookin 5.0 was smokin,

the AOD transmission was slippin...

That 170k drivetrain was tired even in the lincoln.

Now it was time to sit back,

and watch the boys tear it up.

How far will we go only time will tell.

Ok and money!

While the engine may not get rebuilt

this time around,

there will be some changes.

The Lincoln Log exhaust will be swapped

for some scrounged headers,

possibly squeezing out some HP.

I really wanted to build crazy fenderwell headers,

but these fit perfectly with no mods.

The biggest change will be this puppy,

a Ford  WC T-5 transmission (5-spd overdrive)

with a S-10 tail shaft,

which puts the shifter in front of the seat.

A trick unit.

Thanks Jason!

Good thing the clutch pedal is still in there.

More later...

TP