Jake says...
Have a Happy New Year!
JAP
 |
| Happy New Year |
Have a Happy New Year!
JAP
31 December 2011
30 December 2011
modelmania
Xmas 2011 marks the kids (boys) official graduation from Lego's to plastic models.
It was a shocker earlier in the year to see one of the Lego shelves
being cleaned out for the Hot Wheels collection.
Last year they got some Erector set kits,
and it was sadly a bust.
Maybe the timing was wrong,
or maybe it's just that the Erector set's just don't look that cool.
Whatever it is,
the idea of following instructions is the same with all 3,
so I was a little wary that they would enjoy,
and have the patience,
to build models.
They had started with the expendable airplane models at the shop.
Surprisingly the paint, the glue, the tediousness,
didn't scare them.
That night they wanted to start the car models at home.
Sounds good to me!
The wife came home to a house full of fumes.
That night's plan was to finish the engines and let them dry.
I showed them how to make some A-frames out of the scrap.
That was one of the fun things in my brief model time,
using the scrap and melting the pieces together.
I don't think any of my models ever looked like the box pic.
That first night,
they whipped through the engines and moved onto the frame and interior.
I was surprised they liked the painting so much.
Fumes maybe?
I tried not to take over with their building,
On Jake's mustang we radiused the rear wheelwells a bit for the bigger tires.
The other help which I'll not do next time was spray paint the bodies for them.
We used some of leftover paint and it happened to work well.
There is still paint all over the walkway.
Late last night they finished them up.
I'm still a little surprised that they stuck with it.
For their first car models,
they turned out really cool,
and more importantly had fun doing it.
There are more models in their stash,
so stay tuned for more modelmania!
TP
 |
| 1963 chevrolet impala "roadkill" jaxon perich - 11 |
It was a shocker earlier in the year to see one of the Lego shelves
being cleaned out for the Hot Wheels collection.
 |
| 1968 ford mustang "gold digger" jakob perich - 10 |
Last year they got some Erector set kits,
and it was sadly a bust.
Maybe the timing was wrong,
or maybe it's just that the Erector set's just don't look that cool.
Whatever it is,
the idea of following instructions is the same with all 3,
so I was a little wary that they would enjoy,
and have the patience,
to build models.
 |
| model building |
They had started with the expendable airplane models at the shop.
Surprisingly the paint, the glue, the tediousness,
didn't scare them.
That night they wanted to start the car models at home.
Sounds good to me!
The wife came home to a house full of fumes.
 |
| mini A-frames |
That night's plan was to finish the engines and let them dry.
I showed them how to make some A-frames out of the scrap.
 |
| hangin' |
That was one of the fun things in my brief model time,
using the scrap and melting the pieces together.
I don't think any of my models ever looked like the box pic.
 |
| jake's mustang 302 engine |
That first night,
they whipped through the engines and moved onto the frame and interior.
I was surprised they liked the painting so much.
Fumes maybe?
 |
| jaxon's chevy 327 engine |
I tried not to take over with their building,
so I showed them how to use sandpaper and a razorblade to clean up the nubs.
 |
| 1963 chevy impala model |
On Jake's mustang we radiused the rear wheelwells a bit for the bigger tires.
 |
| 1968 ford mustang model |
The other help which I'll not do next time was spray paint the bodies for them.
We used some of leftover paint and it happened to work well.
There is still paint all over the walkway.
 |
| 1968 ford mustang "gold digger" jakob perich - 10 |
Late last night they finished them up.
I'm still a little surprised that they stuck with it.
For their first car models,
they turned out really cool,
and more importantly had fun doing it.
 |
| 1963 chevy impala "road kill" jaxon perich - 11 |
There are more models in their stash,
so stay tuned for more modelmania!
TP
26 December 2011
lessons learned - xmas 2011
Happy to say that I safely navigated the potentially treacherous waters
that can be the wife's Suarez Family Christmas.
This year I brought up the orange bottle of Old Grand Dad 86,
and Jorge and I successfully polished it off without a hitch.
Okay I'll give some credit to my cuñada Stephanie,
who reluctantly had a half-shot!
This is why it was such a big deal.
Two years ago we were on fire.
Jorge and I started drinking about 10pm christmas eve,
and by about 2am we finished off 2 bottles of tequila,
a Hornitos and a Patron Reposado.
Crazy enough to contemplate a 3rd bottle too...
************************************************************
Ween - Fluffy
(on the porch)
************************************************************
By 4am I puked out most of it!
Whew.
Suffice to say it was an interesting night.
The more I drank the more spanish I spoke.
What a christmas morning,
waking up on the porch cuddling a 5 gallon bucket!
Hey we didn't knock over the christmas tree so we weren't that bad!
My kids still give me chit for that night.
Good times...
TP
that can be the wife's Suarez Family Christmas.
 |
| brother-in-laws xmas 2011 |
This year I brought up the orange bottle of Old Grand Dad 86,
and Jorge and I successfully polished it off without a hitch.
 |
| power trio |
Okay I'll give some credit to my cuñada Stephanie,
who reluctantly had a half-shot!
This is why it was such a big deal.
 |
| cuñados xmas 2009 |
Two years ago we were on fire.
Jorge and I started drinking about 10pm christmas eve,
and by about 2am we finished off 2 bottles of tequila,
a Hornitos and a Patron Reposado.
Crazy enough to contemplate a 3rd bottle too...
************************************************************
Ween - Fluffy
(on the porch)
************************************************************
By 4am I puked out most of it!
Whew.
Suffice to say it was an interesting night.
The more I drank the more spanish I spoke.
 |
| on the porch christmas 2009 |
What a christmas morning,
waking up on the porch cuddling a 5 gallon bucket!
Hey we didn't knock over the christmas tree so we weren't that bad!
My kids still give me chit for that night.
Good times...
TP
24 December 2011
Christmas Fun
Here's to a Merry Christmas.
As usual the one pic that came out with good smiles
was mildly off-center!
The boys had been with my brother/wife for a week up in Utah,
so that left the christmas tree prepping to Macey.
First thing to do was go through our outside storage.
Time flies it seemed like I just threw it out there.
This little stand has been around for a bunch of xmas' now.
Good little stand.
We were lucky,
and brought home the first tree Macey picked out.
We've been carting around these ornaments for a long time.
Out of the boxes only the strong survive.
The boys came home to a christmas-y house.
Took about an hour to get back to our normal chaos!
You know I can't just say Merry Xmas without some photo-babble!
Happy Holidays!
TP
 |
| perich brothers & sister |
As usual the one pic that came out with good smiles
was mildly off-center!
 |
| peace to all |
The boys had been with my brother/wife for a week up in Utah,
so that left the christmas tree prepping to Macey.
 |
| outside storage |
First thing to do was go through our outside storage.
Time flies it seemed like I just threw it out there.
 |
| christmas tree stand |
This little stand has been around for a bunch of xmas' now.
Good little stand.
 |
| Macey's choice tree |
We were lucky,
and brought home the first tree Macey picked out.
 |
| perich's xmas tree 2011 |
We've been carting around these ornaments for a long time.
Out of the boxes only the strong survive.
 |
| red lights |
The boys came home to a christmas-y house.
Took about an hour to get back to our normal chaos!
 |
| wild west xmas Jaxon, Macey and Jakob |
You know I can't just say Merry Xmas without some photo-babble!
Happy Holidays!
TP
23 December 2011
hurtlocker truck - modem buster
The past couple days have been crazy.
Ken's getting deployed next week,
so the idea is to get as far as possible before he ships out.
Unfortunately his time is taken up by other things like family and work,
but last night we thrashed hard for a couple hours and got to this point.
Yeah from where you're sitting it probably looks the same as the other pics I've forced on ya guys,
but here's some behind the scenes action.
*********************************************************
Yeah I know I can't hold you're attention for 25 minutes,
but this is an extra long post!
Open another page and just play this while you're checking other stuff out!
Grateful Dead - 08may1977
Scarlet (begonia's) - Fire (on the mountain)
In the old tape days,
I'd listen to the first 30 seconds over and over.
What am I saying, still do!
*********************************************************
19/20th
When I left the engine was getting cleaned up.
It was in amazingly clean condition for being 25 years old.
Maybe it was a replacement engine?
The donor 1985 corvette had 67K miles on it,
and had body damage from a fire.
I did a plastigage on the easy to reach forward crankshaft bearing,
and it was really tight at about .003-4,
so I decided to not take off the rear windage tray and check the others.
One of the rods was checked at .003+ so I didn't do any others.
I can't believe it was barely worn in.
The perfect candidate for a rattle can rebuild.
Here's the "liar's club" session of the day.
My Uncle Steve has all those specialized mechanic tools you see in the pics,
so he dropped this kit off along with the pulley puller.
So strange using the right tools for the job!
Thanks!
Early on Ken had popped out the freeze plugs,
and flushed the engine out.
We had taken an old freeze plug to the auto parts store (o'reilly's)
and he had asked for a couple of them.
The counter guy held it up and asked "what is it?"
It was kinda funny.
So if you guessed C you were correct.
Way better than using an old wood dowel.
Ken had gone billet crazy and gotten a bunch of new trick pieces for the engine.
This was a big learning curve for me.
I thought this stuff was supposed to be easy bolt-on chit.
After replacing the timing chain,
(original wasn't too bad but had a plastic gear)
the new aluminum timing chain cover popped on easily.
We found a cool one piece oil pan gasket,
and it was a little tricky to fit into the tight groove of the cover.
A little stretching and it popped in ok.
I thought the oil pan would go on easy at this point.
Oh yeah I forgot to mention the old corvette oil pan.
My uncle noted it must have been a high capacity oil pan,
and it had a longer oil pump screen or pickup tube,
so the new oil pan wouldn't fit.
(The correct one is Melling 55s1)
I used a 5/8 wrench to help tap onto the pump.
The next small problem was the oil pan.
If you look at the new seal,
the corners are rounded out.
The oil pan has a sharp edge on it,
probably needed for the original 4-piece gasket.
There was huge gap that bolt compression wouldn't fix.
If you look closely the corners are filed down.
Still a tight fit but won't smash up the seal now.
So now we're ready to put this damn thing on.
The only thing I'd have liked is some baffle in the oil pan.
This is probably why I'm not as excited about the mechanical stuff as I used to be.
It takes such a long time to do stuff that's doesn't seem like it should take as long!
I ended up resorting to my helper,
old grand dad.
No it wasn't to get wasted, just smooth things out.
I only needed enough to not be able to drive home.
Nothing like being held hostage at the shop with alcohol breath!
Good stuff, tastes like apple juice!
21st
The next day the main goal was to fix that part of the floor I had cut out,
and then paint the bottom of the body so it wouldn't have to be removed later on.
There were a handful of little fixes to do.
That chain hoist has proved invaluable.
The paint is a linear polyurethane boat paint,
super strong stuff.
There's a flattening agent in it and I rolled/brushed it on.
It actually looks good!
22nd
With the cab strung up to dry,
now it was time to get the tranny and engine in the frame.
I figured this would be an easy gasket and filter swap right!
All I had to do was pop the old filter out and throw on the gasket.
I've worked on aod's and th350's and they were easy enough.
Well I don't know if this is normal but the little oil ring got stuck in that hole.
I had to pop out the old one,
it has a steel inner structure so it doesn't just slide out.
On top of that,
I had to file down the lip cause it wouldn't fit all the way into the hole!
What next!
Things went smoothly for a while.
Engine and transmission slid right in.
Thankfully the driveshaft also fit.
I gotta say it looks trick.
It was getting late,
so I thought,
"let's do some easy stuff like put on the water pump"...
Ken had cleaned it up earlier,
and it had some life left in it.
Of course it didn't fit.
As a result of that aluminum timing chain cover,
those little bolts that hold on that plate made a big gap!
Fortunately had a stash of little SS button heads.
By 8pm Ken got off his leash and came down to join the fray.
We busted ass and got the front suspension installed.
This was a big deal for us.
He had spent hours cleaning it,
replacing bushings and ball joints.
This was the first time it had been on wheels for months.
Time for a little celebration.
The whiskey shot and coke chaser meant Ken was stuck at the shop for another hour.
Good trick huh!
He also found out how the Grateful Dead 1978 power set comes into play!
It also motivated us to get the body and some other parts on,
and see what the real ride height was going to be.
I was happy with how that rolled paint had turned out.
The flatness really hides any screwups.
No he doesn't get the steering wheel!
I've got to say this truck is gonna be a bad ass driver.
Ken's really spared no expense in getting some trick parts for it.
I can't personally afford the "billet collection",
so it's been fun figuring it all out for him.
Before Ken's mini cooper turned into a pumpkin,
we threw the fenders and bumper on.
Right now the big 22" DONK wheels are out back,
and the 17" wheels are in front.
At least it's big and littles!
Let's hope he gets some good rims when he gets back!
After Ken left I had my own little sober up celebration,
burning all the boxes!
Thanks for tunin in!
Good times...
TP
Ken's getting deployed next week,
so the idea is to get as far as possible before he ships out.
Unfortunately his time is taken up by other things like family and work,
but last night we thrashed hard for a couple hours and got to this point.
 |
1955 chevrolet pickup truck + 1985 corvette running gear = Hurtlocker Truck |
Yeah from where you're sitting it probably looks the same as the other pics I've forced on ya guys,
but here's some behind the scenes action.
*********************************************************
Yeah I know I can't hold you're attention for 25 minutes,
but this is an extra long post!
Open another page and just play this while you're checking other stuff out!
Grateful Dead - 08may1977
Scarlet (begonia's) - Fire (on the mountain)
In the old tape days,
I'd listen to the first 30 seconds over and over.
What am I saying, still do!
*********************************************************
19/20th
When I left the engine was getting cleaned up.
 |
| 1985 corvette L98 350 |
It was in amazingly clean condition for being 25 years old.
Maybe it was a replacement engine?
The donor 1985 corvette had 67K miles on it,
and had body damage from a fire.
I did a plastigage on the easy to reach forward crankshaft bearing,
and it was really tight at about .003-4,
so I decided to not take off the rear windage tray and check the others.
One of the rods was checked at .003+ so I didn't do any others.
I can't believe it was barely worn in.
The perfect candidate for a rattle can rebuild.
Here's the "liar's club" session of the day.
 |
| a. stool? b. metal detector? c. freeze plug installer? |
My Uncle Steve has all those specialized mechanic tools you see in the pics,
so he dropped this kit off along with the pulley puller.
So strange using the right tools for the job!
Thanks!
 |
| brass freeze plugs |
Early on Ken had popped out the freeze plugs,
and flushed the engine out.
We had taken an old freeze plug to the auto parts store (o'reilly's)
and he had asked for a couple of them.
The counter guy held it up and asked "what is it?"
It was kinda funny.
 |
| freeze plug install tool |
So if you guessed C you were correct.
 |
| nice brass freeze plugs |
Way better than using an old wood dowel.
Ken had gone billet crazy and gotten a bunch of new trick pieces for the engine.
This was a big learning curve for me.
I thought this stuff was supposed to be easy bolt-on chit.
 |
| silicon oil pan gasket aluminum timing chain cover |
After replacing the timing chain,
(original wasn't too bad but had a plastic gear)
the new aluminum timing chain cover popped on easily.
We found a cool one piece oil pan gasket,
and it was a little tricky to fit into the tight groove of the cover.
A little stretching and it popped in ok.
I thought the oil pan would go on easy at this point.
 |
| Melling 55s1 oil pump screen |
Oh yeah I forgot to mention the old corvette oil pan.
My uncle noted it must have been a high capacity oil pan,
and it had a longer oil pump screen or pickup tube,
so the new oil pan wouldn't fit.
(The correct one is Melling 55s1)
I used a 5/8 wrench to help tap onto the pump.
 |
| aluminum oil pan |
The next small problem was the oil pan.
If you look at the new seal,
the corners are rounded out.
The oil pan has a sharp edge on it,
probably needed for the original 4-piece gasket.
There was huge gap that bolt compression wouldn't fix.
 |
| modified aluminum oil pan |
If you look closely the corners are filed down.
Still a tight fit but won't smash up the seal now.
 |
| ready |
So now we're ready to put this damn thing on.
The only thing I'd have liked is some baffle in the oil pan.
 |
| bottom's up aluminum oil pan installed |
This is probably why I'm not as excited about the mechanical stuff as I used to be.
It takes such a long time to do stuff that's doesn't seem like it should take as long!
 |
| chevy 350 |
I ended up resorting to my helper,
old grand dad.
 |
| old grand dad whiskey stash |
No it wasn't to get wasted, just smooth things out.
I only needed enough to not be able to drive home.
Nothing like being held hostage at the shop with alcohol breath!
Good stuff, tastes like apple juice!
21st
 |
| new floor reinforcement |
The next day the main goal was to fix that part of the floor I had cut out,
and then paint the bottom of the body so it wouldn't have to be removed later on.
 |
| quick fix |
There were a handful of little fixes to do.
 |
| hoist it up, again |
That chain hoist has proved invaluable.
The paint is a linear polyurethane boat paint,
super strong stuff.
There's a flattening agent in it and I rolled/brushed it on.
It actually looks good!
22nd
With the cab strung up to dry,
now it was time to get the tranny and engine in the frame.
 |
| custom transmission stand |
I figured this would be an easy gasket and filter swap right!
 |
| 700r4 transmission |
All I had to do was pop the old filter out and throw on the gasket.
I've worked on aod's and th350's and they were easy enough.
Well I don't know if this is normal but the little oil ring got stuck in that hole.
 |
| 700r4 filter and old oil seal |
I had to pop out the old one,
it has a steel inner structure so it doesn't just slide out.
On top of that,
I had to file down the lip cause it wouldn't fit all the way into the hole!
What next!
 |
| engine/tranny in! |
Things went smoothly for a while.
Engine and transmission slid right in.
 |
| aluminum driveline |
Thankfully the driveshaft also fit.
I gotta say it looks trick.
It was getting late,
so I thought,
"let's do some easy stuff like put on the water pump"...
 |
| stock aluminum water pump |
Ken had cleaned it up earlier,
and it had some life left in it.
Of course it didn't fit.
 |
| modified aluminum water pump |
As a result of that aluminum timing chain cover,
those little bolts that hold on that plate made a big gap!
Fortunately had a stash of little SS button heads.
 |
| stock aluminum water pump aluminum timing chain cover |
By 8pm Ken got off his leash and came down to join the fray.
We busted ass and got the front suspension installed.
This was a big deal for us.
He had spent hours cleaning it,
replacing bushings and ball joints.
 |
| Hurtlocker Truck 1955 chevy truck frame 1985 corvette running gear |
This was the first time it had been on wheels for months.
Time for a little celebration.
 |
| old grand dad coke chaser $11 of goodness |
The whiskey shot and coke chaser meant Ken was stuck at the shop for another hour.
Good trick huh!
He also found out how the Grateful Dead 1978 power set comes into play!
 |
| stubby (no that's not the correct steering column angle!) |
It also motivated us to get the body and some other parts on,
and see what the real ride height was going to be.
 |
| cockpit |
I was happy with how that rolled paint had turned out.
The flatness really hides any screwups.
No he doesn't get the steering wheel!
 |
| street truck |
I've got to say this truck is gonna be a bad ass driver.
Ken's really spared no expense in getting some trick parts for it.
I can't personally afford the "billet collection",
so it's been fun figuring it all out for him.
 |
| Hurtlocker Truck not Hurt Locker Truck |
Before Ken's mini cooper turned into a pumpkin,
we threw the fenders and bumper on.
Right now the big 22" DONK wheels are out back,
and the 17" wheels are in front.
At least it's big and littles!
Let's hope he gets some good rims when he gets back!
 |
| 1955 chevy pickup |
After Ken left I had my own little sober up celebration,
burning all the boxes!
 |
| bon fire |
Thanks for tunin in!
Good times...
TP